How may we help you?

Orion 32+ Gen 4

Account Creation, Product Activation and Software Installation

This Orion 32+ Gen4 product activation is a mandatory process required to be completed

on the first run of the interface. It is needed to validate your product warranty and to gain

access to our special software packages and exclusive product offers.

Please note that the mandatory device activation procedure requires an active Internet

connection on your computer. Activating an Antelope Audio device offline is not possible.

1. Connect the provided power supply to the power connector on the Orion 32+ Gen4's

rear panel. Connect the power plug to an AC/DC mains outlet.

Note: The switching power supply automatically accommodates mains electricity in any

country. Always use the provided power supply to prevent accidental damage.

2. Connect the Orion 32+ Gen4 to your Windows or Mac computer using a USB-C cable or

a Thunderbolt™ 3 cable (not included).


Legacy Thunderbolt™ 2 connections are possible using third-party adapters and

corresponding cables.


The USB or Thunderbolt™ connection is required to have the Orion 32+ Gen4

recognized by the Antelope Launcher and Control Panel applications at all times.

3. Open your internet browser and navigate to

4. Login to the Antelope Audio user area with your e-mail and password. If you don't have

an account, visit to create one.

5. Click on the 'Activate New Device' button.

6. Click on ‘Orion 32+ Gen4' from the device list.

7. Download and install the Antelope Launcher application for Windows or macOS.

8. Open the Antelope Launcher application and click on the 'Login' button. Enter the

e-mail and password you used to login into the Antelope Audio user area and click 'Login'.

9. Click on 'Activate' to open the Device Management Wizard.

Note: If the Orion 32+ Gen4 does not appear in the 'Devices' tab, click on 'Not seeing your

device?' and follow the on-screen instructions.

10. In the Device Management Wizard, choose 'Enable additional features” if you prefer to

configure functionality add-ons as well (available later) and click 'Continue'.

11. Upon successful activation, the final window will read ‘You have successfully activated

your device. Software is required to be installed and up to date for the device to be used.'

Click 'Software Installation' to go through the rest of the setup process or ‘Install Later’ if

you prefer to postpone this step. It is available later via the launcher’s Manage Device


The following warning message advises to power off or unplug any devices connected to

the Orion 32+ Gen4 to avoid any potential damage during the firmware installation

process. Click ‘Continue’ when ready and go through the instructions that follow.

After the installation is complete, you can proceed with the instructions for your operating

system and configure the Orion 32+ Gen4 for use with your Windows or macOS computer.

Note: The Orion 32+ Gen4 will be listed in the 'My Hardware' page of the Antelope Audio

user area with its serial number and activation date.

Setting up after online activation is complete

Configuring for Windows 10

When using a USB connection under Windows, here is how you can configure operating

system playback using Windows Audio.

1. Enter the ‘Sound’ options window from the Windows Control Panel; or right-click

the speaker icon in the system tray and choose ‘Open Sound settings’.

2. Under the Playback and Recording tabs, 4 stereo channel pairs are available for

playback and recording, corresponding to the first 8 DAW Out and In channels in

the interface’s signal routing matrix. These can be used for playing and recording

audio with applications using Windows Audio as opposed to the ASIO driver.

3. Make sure the Orion 32+ Gen4 Playback channels 1/2 are selected as the default

playback device for seamless playback experience. Same is valid for the Recording



• Please note that Windows Audio is not yet supported over a Thunderbolt

connection, only ASIO. We recommend using the VB-Audio VoiceMeeter Virtual

Audio Mixer as an ASIO to Windows Audio bridge.


If you are experiencing interruptions or failure when using your DAW and trying to

playback audio from your OS at the same time, make sure that the device sample

rate matches the one of your DAW session.

Further Reading

Antelope Audio Knowledge Base - Windows 10 Optimization

Configuring for macOS (10.14 and later) 

The security settings in macOS (10.14 and later) may result in no input signal reaching your

DAW, despite having everything set up correctly. These steps apply when you are using the Orion 32+ Gen4 in a DAW for the first time:

1. Launch your DAW and choose Orion 32+ Gen4 as the input device. The following dialog

box will appear (if using Ableton Live 10 Suite, for example):

2. Click 'OK' and your DAW should function normally.

However, if the events above did not occur for some reason, or you are using multiple

DAWs, you must do a manual tweak for each in 'Security & Privacy' settings:

1. Click the 'Apple' symbol and choose 'System Preferences'. Head to the 'Security &

Privacy' settings menu.

2. Click the 'Privacy' tab. In the column on the left, choose ‘Microphone’. Make sure there's

a checkmark next to any DAW you want to use.

Note: You may have to click the padlock symbol in the bottom left corner and enter your

password to make changes.


In this article you can find the download link for your antelope device.