How may we help you?


How to connect your Antelope Audio device via Thunderbolt

NOTE: Please, have in mind that Antelope Audio devices are currently incompatible with Thunderbolt 4 on Windows computers. 


To connect your Thunderbolt devices to your Windows Computer:



1. Connect the device directly to your Windows computer via certified Thunderbolt cable. If needed - use a certified TB adapter.


2. Open "System Menu" with the designated buttons on the front/top of your device. You can find how to access "System Menu" on your device from your device's user manual.

Navigate to "Comm interface" or "Change interface" by rotating Rotary knob on your interface and select the option by pressing the Rotary knob of your interface. 

By rotating the Rotary knob select "Thunderbolt" and save the setting by pressing the Rotary knob.


3. Open the Antelope Launcher and navigate to "System" tab. 


Select Antelope Thunderbolt Driver's latest version (1.4.7) and put a tick on the empty checkbox next to the driver's version. An "Update" title will light in red at the bottom right corner of the Antelope Launcher. Click it in order to update it (picture attached below): 


4. Click here to download VoiceMeeter.


5. Install the software and restart your computer.


6. Open VoiceMeeter and select your "Hardware Out" to be "Antelope Audio Thunderbolt"



If you are still having issues running your Antelope Audio device, please check this article to make sure the control panel and firmware are up to date.


------------------------------------------------------------------------------------------------------------------------------------------

Mac OS Thunderbolt Connection and Set up (for Mojave and later). 


These following devices only have a Thunderbolt port and they do not need to have their "Comm interface" changed.:  

 - Zen Q Thunderbolt Synergy Core

 - Galaxy 32 Synergy Core

 - Galaxy 64 Synergy Core


-------------------------------------------------------------------------


How to connect your Thunderbolt devices to your Mac computer:



1. Connect the device directly to your Windows computer via certified Thunderbolt cable. If needed - use a certified TB adapter.


2. Open "System Menu" with the designated buttons on the front/top of your device. You can find how to access "System Menu" on your device from your device's user manual.


Navigate to "Comm interface" or "Change interface" by turning the Rotary knob on your interface. Select the option by pressing the Rotary knob of your interface. 


Use the Rotary knob and select "Thunderbolt". Save the setting by pressing the Rotary knob.


3. Please, follow the article below ONLY if you are using M1 Mac Computer: 


Antelope Audio Compatibility with Apple M1 Computers


4. Open Antelope Launcher and navigate to "System" tab.


Select the unified driver's latest version and put a tick on the empty checkbox next to the driver's version. Click the update button in the bottom right corner to install it. 


5. Open "System preferences" on your Mac, navigate to "Security and Privacy" -> "General" tab.

Allow our driver to have access to your Mac. (The file name is "Elektrosfera").

For more detailed instructions on how to allow the driver on MAC OS, please check this link


6. Restart your computer and after it boots up, you are good to go. 



If you are still having issues running your Antelope Audio device, please check this article to make sure the control panel and firmware are up to date.




Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.