How may we help you?

You can control and monitor up to 122 channels at the same time. Here's how:

Option 1:

1. Use Mix Channel 1 for the first 32 channels.
2. Route the summed outputs of Mix 1 L/R (channels 1 and 2) to Mix Channel 2, and add another 30 channels.
3. Repeat this step, routing each Mix L/R output to the next Mix Channel, until you’ve used all available Mix channels.
4. Finally, route the Mix 4 L/R outputs to the monitor or headphone output. This signal will contain all 122 channels summed together.
5. You can adjust the volume levels from the 'Mixer' tab in the control panel.

Option 2:

1. Use all 32 channels of Mix Channels 1, 2, and 3.

2. Route the summed outputs of these mixes to Mix Channel 4, and add an additional 26 channels.

3. Finally, route Mix 4 L/R (channels 1 and 2) to the desired output. This will be the complete mix of all 122 channels.

4. Volume levels can be adjusted from the 'Mixer' tab in the control panel.