Here you can download the Antelope Audio Drivers and Launcher software.

Read about OS Compatibility here 



Drivers:

Windows 10

Orion32+ Gen3 USB Audio Driver Setup 

Windows 10 Thunderbolt™ Driver:

Thunderbolt Audio Driver for Windows 10 (F.A.Q Section)

macOS 

Unified Driver Installer for Mac OS 

Launchers:

Windows 10

Download Latest Windows Launcher

macOS 10.12 / 10.13 / 10.14

Download Latest Мac OS Launcher



System Requirements:

Mac:

  • Apple Mac 2012 or [newer] with available Thunderbolt™ & USB 2.0/USB 3.0/3.1 port.
  • Minimum  Mac OS X 10.12 Sierra.  Recommended Mac OS X 10.14 Mojave.
  • Available Hard Drive Storage Space
  • Memory (RAM): 4 GB Minimum (8 GB or more recommended)

Windows:

  • PC computer with available  USB 2.0/USB 3.0/3.1 or Thunderbolt™ port - See our Thunderbolt FAQ section
  • Windows 10 x64 Bit  with latest Microsoft Updates
  • Available Hard Drive Storage Space
  • Memory (RAM): 4 GB Minimum (8 GB or more recommended)
  • (Minimum) CPU: Intel Core i3™  or AMD FX or Higher.

Additional Information:

  • USB 2.0 Cable  [included with the purchase ]  or Thunderbolt Cable [Not included Purchased Separately] 
  • Minimum 1 GB available Storage Space [Hard Disk Space] 
  • Stable Internet connection to download and update your Antelope Software.
  • Core i7  or better processor recommended

Notes:

1.Changes    to system requirements may apply at any time. Antelope Audio reserves    the right to delete/change/modify content under the System  Requirements   page to ensure up-to-date compatibility information.

We    do recommend Internet connection to be Active all the time. We do use  a   server update system which works on the auto-detection process.    Internet connection is required to ensure the normal update process of    the Antelope Launcher Software. 

In    cases where internet connection can't be provided, the user will be   able   to use the latest installed software from the Antelope Launcher   but it  may miss critical software updates. 

New  users of Orion 32+ Gen 3. must enable internet connection for Activation  process and software update. The device will not be operational if it's  not updated & activated when newly purchased.

All    Listed operating systems are supported, not listed operating systems    may still work but we won't be able to guarantee their stability.

Antelope Audio Technical Support reserves the right to reject troubleshooting, when recommended operating system requirements are not met.

     2.Note for Windows users:

     Some PC builds will not able to provide enough USB bandwidth for the full capacity for transferring 32 channels of I/O            between the interface and computer. This is due to the fact our devices are constantly multi-streaming the full amount of       channels available.

     If you are experiencing this please follow the Windows Optimization guide located on our support page:

     https://support.antelopeaudio.com/support/solutions/articles/42000055393-windows-10-general-computer-optimisation-guide

    If the above does not suffice and allow you to use 32 channels, this means that there is hardware bandwidth limitation of        the USB buss of your motherboard (this can happen with any motherboard, even the current top builds). In this case, we        advise you to purchase and install an additional High-Speed USB2.0 PCI/e-card with a dedicated internal power supply.

Orion 32+ Gen.3 - User Manual